MIRAI MR06-01 Underway Thermosalinograph

Last Modified: 2017-06-29
: MR06-01
: Processed (DMO)-QCed
: JAMSTEC
: Temperature, Salinity, Dissolved oxygen
:
OCEANS > OCEAN CHEMISTRY > OXYGEN
OCEANS > SALINITY/DENSITY > SALINITY
OCEANS > OCEAN TEMPERATURE > SEA SURFACE TEMPERATURE

For Using Data

Data Management Office
See Terms and Conditions about constrain of use.
See Terms and Conditions about data citation.
Instrument:
Continuous sea surface water monitoring system ( - MR10-03 Leg2)
Thermosalinograph measures the following surface parameters continuously.
- temperature
- salinity
- dissolved oxygen
Sea surface water is continuously pumped up at 4.5 meters depth to the sea surface monitoring laboratory and then flowed into each analysis equipment through a steel pipe and a vinyl-chloride pipe.
The flow rate of this system is controlled by some valves. Data are recorded in the personal computer.

• Temperature sensor
Model : SBE 3S, Sea-Bird Electronics,Inc.
Serial number : 2607
Measurement range : -5 to 35 deg-C (ITS-90)
Sensor location : Bow thruster room
• Salinity sensor
SEACAT THERMOSALINOGRAPH
Model : SBE-21, Sea-Bird Electronics,Inc.
Serial number : 3126
Measurement range : [temperature] -5 to +35 deg-C (ITS-90), [conductivity] 0 to 6.5 S/m
Sensor location : Sea surface monitoring laboratory
• DO sensor
Model : 2127A, Hach Ultra Analytics Japan Inc.
Serial number : 47477
Measurement range : 0 to 14 ppm
Sensor location : Sea surface monitoring laboratory

Date/Time (UTC) Start/Stop Remarks
2006/02/07, 02:07start36-44.97N, 143-39.05E
2006/02/24, 23:10stop02-42.31S, 152-51.30E
2006/02/25, 00:11start02-34.29S, 152-37.41E
2006/03/13, 23:47stop23-17.12N, 148-03.79E

Calibration Information is as follows.
(1) Quality control
QCed data were added flag according to the NODC (National Oceanographic Data Center) quality control procedure.
1) The gradient check of adjacent depth data
Please see the site of NODC of the following link for quality control procedure in detail.
In addition, an abnormal value is identified by a visual check, and the data after visual QC is released.
(1)In this cruise, there is extra data (fluorescence intensity, particle size of plankton) in additional to temperature, salinity, dissolved oxygen that has been opened to the public. Please contact us from "Contact Us" above if necessary.
: MR06-01
: Processed (DMO)-QCed
: JAMSTEC
: Temperature, Salinity, Dissolved oxygen
:
OCEANS > OCEAN CHEMISTRY > OXYGEN
OCEANS > SALINITY/DENSITY > SALINITY
OCEANS > OCEAN TEMPERATURE > SEA SURFACE TEMPERATURE

Observation Map

Imagery reproduced from ...

Figures

Data List

File names
20060207.dat
20060208.dat
20060209.dat
20060210.dat
20060211.dat
20060212.dat
20060213.dat
20060214.dat
20060215.dat
20060216.dat
20060217.dat
20060218.dat
20060219.dat
20060220.dat
20060221.dat
20060222.dat
20060223.dat
20060224.dat
20060225.dat
20060226.dat
20060227.dat
20060228.dat
20060301.dat
20060302.dat
20060303.dat
20060304.dat
20060305.dat
20060306.dat
20060307.dat
20060308.dat
20060309.dat
20060310.dat
20060311.dat
20060312.dat
20060313.dat
ex_read.f (Sample Program)
: MR06-01
: Processed (DMO)-QCed
: JAMSTEC

TSG DMO (MR98-K01 - MR10-03)

Format Description for the Corrected Data
Please see the site of each cruise.
Format Description for the QCed Data (MR98-K01 - MR10-03)
  1. Each data file contains one line header (meta data) followed by data lines for one day.
  2. The number of data lines are recorded in the header.
  1. Header part
No. Column Content Format Remarks
1 1 Header ID a1 fixed as '#'
2 3 - 6 Data ID a4 TSG
3 8 - 22 Cruise ID a15 MRYY-(K)XX(_legx)
4 68 - 71 Number of data lines i4
5 72 - 73 Terminator - CR+LF
  1. Data part
No. Column Content Unit Format Remarks
1 1 -  8 Date - i8 YYYYMMDD (UTC)
2 10 - 13 Time - i4 hhmm (UTC)
3 15 - 23 Latitude - i2,a1,f5.2,a1 dd-mm.mmN(S)
4 25 - 34 Longitude - i3,a1,f5.2,a1 ddd-mm.mmE(W)
5 35 - 45 Temperature deg-C f11.4 ITS-90
6 46 - 56 Salinity PSU f11.4 PSS-78
7 57 - 67 Dissolved oxygen mg/l f11.4
8 68 - 78 Flag - i11 1- 6 : space
7 : flag of date/time
8 : flag of latitude/longitude
9 : flag of temperature
10 : flag of salinity
11 : flag of dissolved oxygen
* reference : 'Definition of Quality Control Flags'
9 79 - 80 Terminator - - CR+LF

Definition of Quality Control Flags
  1. Depth Flags
  2. 0 - accepted value
    1 - error in recorded depth ( same or less than previous depth )
    2 - density inversion

  3. Observed Level Flags
  4. N - missing value
    0 - accepted value
    1 - range outlier ( outside of broad range check )
    2 - failed inversion check
    3 - failed gradient check
    4 - zero anomaly
    5 - failed combined gradient and inversion checks
    6 - failed range and inversion checks
    7 - failed range and gradient checks
    8 - failed range and zero anomaly checks
    9 - failed range and combined gradient and inversion checks
    A - failed visual check

    * The check only about range check for Thermosalinograph data.

  5. Date and time flag (Thermosalinograph only)
  6. 0 - accepted data and time
    1 - failed duplicate/missing/incorrect date and time

  7. Position flag (Thermosalinograph only)
  8. 0 - accepted position
    1 - failed estimated ship speed check including missing/incorrect position

    QCed data were added flag according to the NODC (National Oceanographic Data Center) quality control procedure, additionally visually checked. Please see the site of NODC of the following link for quality control procedure.

Related Information

Update History

2017-06-29
An observation data was registerd.
2014-07-29
An observation data was registerd.
2014-03-08
An observation data was registerd.
2012-11-25
An observation data was registerd.