KAIREI Instrument

Instrument

Multi beam echo sounder (KR14-04 - )

Manufacturer : L3Communications ELAC Nautik
Type : Sea Beam 3012

The system transmits the shape echo sounder beam from the transmitter and receives the beam reflected from the seabed using the hydrophone. The water depth is calculated from the travel time of the beam between the transmitter and the receiver.

マルチナロービーム測深装置 (KR13-10 - KR14-03)

Manufacturer : L3Communications ELAC Nautik
Type : Processor : Sea Beam 3012 / Transducer : Sea Beam 2112.004

The system transmits the shape echo sounder beam from the transmitter and receives the beam reflected from the seabed using the hydrophone. The water depth is calculated from the travel time of the beam between the transmitter and the receiver.

Multi-narrow beam echo sounder ( - KR13-09)

Manufacturer : SeaBeam Instruments
Type : Sea Beam 2112.004

Multi-narrow beam echo sounder manufactured by SeaBeam Instruments is used on R/V KAIREI. The system emits multiple acoustic beams from ship's bottom, and simultaneously receives their reflected beam from sea floor. Thus the ocean floor topography is clarified by this system. Moreover, the composition of sea floor material is revealed by strength of echoes.

Shipboard gravimeter (KR16-E03 - )

Manufacturer : Micro-g LaCoste, Inc.
Type : MGS-6

This gravimeter consists of a highly damped, spring type gravity sensor mounted on a gyro stabilized platform with associated electronics for obtaining gravity reading. The length of the spring which supports a weight in the tub is measured and the gravity is calculated.

Shipboard gravimeter ( - KR16-07)

Manufacturer : Fuguro Co., Ltd.
Type : BODESEEWERK KSS31

Microgravimeter (KR08-02 - )

Manufacturer : SCINTREX Limited.
Type : CG-5

Microgravimeter is used to make a tracability of the shipboard gravimeter. The gravity is measured both at pier and at the standard point where the absolute gravity is well known. What is necessary is just to install it horizontally, since this gravity meter performs measurement and the compensation by the tide automatically.

Microgravimeter ( - KR07-18)

Manufacturer : SCINTREX Limited.
Type : CG-3M

Microgravimeter is used to make a tracability of the shipboard gravimeter. The gravity is measured both at pier and at the standard point where the absolute gravity is well known. What is necessary is just to install it horizontally, since this gravity meter performs measurement and the compensation by the tide automatically.

3 component magnetometer

Manufacturer : Tierra Technica Ltd.
Type : SFG1214

Geomagnetic field strength resolved into X, Y and Z components is measured by this instrument. This sensor is fixed on an aluminum platform mounted on the top part of foremast to minimize magnetic influences of ship's hull and manmade noises.

Proton magnetometer

Manufacturer : Kawasaki Geological Engineering Co. Ltd. and Tierra Technica Ltd.
Type : PM217 (Sensor unit is the same as PROTO10)

With this equipment, the geomagnetic field strength of sea area is mesured. In order to avoid magnetic influence of hull, the sencor is towed approximately 300m off the stern.

Proton magnetometer

Manufacturer : Kawasaki Geological Engineering Co. Ltd.
Type : PROTO10

With this equipment, the geomagnetic field strength of sea area is mesured. In order to avoid magnetic influence of hull, the sencor is towed approximately 300m off the stern.

XBT/XCTD

Manufacturer : Tsurumi Seiki Co., Ltd.
Type : MK-130

XBT measures the vertical profile of water temperature during free fall of its probe part(temperature sensor) in the seawater. XCTD measures the vertical profile of water temperature and salinity during free fall of its probe part(temperature sensor and conductivity sensor) in the seawater. These system can be used at under way.

Piston corer

Manufacturer : RIGOSHA Co., Ltd.
Type :

Piston corer is a sampler to take sea floor sediment in long length(20m maximum).

Radio navigation system

Manufacturer : SENA Co., Ltd
Type :

This system displays as various navigation information graphically to support the ship handling. The principal observed data is recorded with the navigation information by this system. Moreover the navigation information is distributed to some observation systems simultaneously with LAN.

Hydroacoustic navigation system

Manufacturer : Oki Elctric Industry Co., Ltd.
Type :

This system measures the relative position of vessel by transponders placed on sea floor. In operation, retractable transducer is extended form the bottom of vessel. It is also possible to tramsmit a command with this system to the acoustic release.